落球回弹试验仪,介电击穿强度测定仪

ASTMD495耐高压低电流电弧放电试验机

ASTMD495耐高压低电流电弧放电试验机

日期:2025-11-16 03:15
浏览次数:2194
摘要:
ASTMD495耐高压低电流电弧放电试验机

高输出功率小瞬时电流耐压仪(耐电弧放电耐压仪)-(求算机调整)

High voltage low current tester (arc resistance tester) - (computer control)

品牌英文名称:耐电弧试验机

Product name: electric arc resistance tester

车辆材质:NDH-A

Product model: NDH - A

要求原则:GB/T 1411-2002《液态接地材料耐高压得很低电流大小电孤蓄电池充电的耐压》(共同IEC  61621-1997)及ASTM D495等规范的让的设计制造厂的,并包含IEC 149、UL 746A等实验室检测方式

Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc

一 概述

一An overview of the

注意符合的范围及功能表:

本检测机是可以依照应该应用于交流电动机、电气元件和家里用的电气元件等职业的高压电工用塑胶板材材质、光敏聚酯树脂胶和隔绝电阻漆等隔绝电阻建材的耐焊弧放电效果评选,主应用于固态隔绝电阻建材如:塑胶板材材质、塑料薄膜、光敏聚酯树脂、黑云母、陶瓷图片、破璃、隔绝电阻油、隔绝电阻漆、硬纸板等物质的耐焊弧放电效果软件测试;

本检验机由电子控制系统正常运行,能屏幕上显示到现阶段工作进行试验形态及进行试验时间段,进行试验完毕后并存放到现阶段工作进行试验数据表格,并可网页打印.原则实践评估。

Main scope of application and features:

This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;

This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report 

二 功能特点

1 滤油机为两边成一体空间结构,下处为操控装置,上半部为耐压箱。

2 本货品主要包括*新智力把控好技术设备,能够 选取小程序(IEC或ASTM)可智能通过疲劳试验,并在pc上表明检验过程中和可是。

3 **性能指标良好的,抗串扰工作能力强,自测的精密性强。

二:Functional features:

1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.

2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.

3 good safety performance, strong anti-interference ability, high test precision. 

三 主要技术参数

1 焊弧通断时候误差度:高于 ±10ms

2 调压器数量:2kVA

3 载荷系数测试电流值:12.5kV

4 疲劳试验电流电压精度等级:±3%

5 电流大小的控制精确度:±10%  交流电精确测量导致精度:1.5%

6 电极材料对试件材料有压力:(0.5±0.05)N

7 电级建筑材料:钨棒

8 电级离:(6.35±0.1)mm(IEC)

               (6.0±0.1)mm(ASTM)

9 安全使用生态环境热度:(23±2)℃

10 操作大环境含水率:(50±5)%

11 开关电源:220V±5%  50Hz  10A

12 现场实验    措施:   国际标准/美标/10 mA 间断/20 mA 间断性/30 mA联续/40 mA不断

13 耐压系统程序相应:

方式段

焊弧交流电

mA

焊弧通断时期s

各环节段不断日期s

检验总时长s

 

 

IEC 61621

ASTM D495

 

 

1

10

1/8s通 7/8s断

1/4s通 7/4s断

60

60

2

10

1/4s通 3/4s断

1/4s通 3/4s断

60

120

3

10

1/4s通 1/4s断

1/4s通 1/4s断

60

180

4

10

反复通

60

240

5

20

反复通

60

300

6

30

间断性通

60

360

7

40

累计通

60

420

Three main technical parameters:

Error: 1 arc on-off time less than plus or minus 10 ms

Transformer capacity: 2 kva

3 test voltage rating: 12.5 kV

4: test voltage accuracy + / - 3%

5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%

6 electrode pressure on sample: (0.5 + 0.5) N

7 electrode materials: tungsten rods

8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)

9 using the environment temperature (23 + 2) ℃

10 use environment humidity: (50 + 5) %

Power supply: 220 v + 5% for 50 hz 10 a

Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous

13 test procedure is as follows:

Procedures section of the arc current

MA arc on-off time s the program s test total duration time s

IEC 61621 ASTM D495

1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s

2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s

3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s

4 consecutive 10 to 60, 240

5 20 consecutive 60, 300

30 consecutive 6 to 60, 360

7 consecutive 40 to 60, 420 

四  配置

编号

称谓

用户

微信备注

01

耐脉冲检验仪

几台

 

02

工业程序

有一套

 

03

电级支承

整套

 

04

电源线落球回弹试验仪,介电击穿强度测定仪

有一套

 

05

的接地放**

一瓶

 

06

瞬时电流毫安表

一个

 

07

电脑主机测控pc软件

一系列

 

08

坯料架

一批

 

09

电极片差距标准规定块

2块

 

10

视场角规范块

2块

 

11

瓷质片

2片

 

12

喷墨针式打印机机

1台

厂家

13

换算机

1台

产品品牌

14

操作描述书

1份

 

15

合适证

1份

 

 

Four configuration:

Serial number name number note

01 arc resistance tester

02 a electrode system

03 electrode bearing a set

04 a set of power cable

05 ground put a rod

06 milliammeter current one

7 a set of computer measurement and control software

08 specimen holder a

09 electrode distance standard 2 blocks

Standard 2 blocks of 10 Angle

11 ceramic pieces 2 pieces

12 one brand inkjet printer

13 1 computer brand

14 1 instruction manual

15 1 certificate

五 厂品参数:

NDH-A    耐脉冲试验报告仪-微机把控好

NDH-B    耐脉冲试验检测仪-手触屏有效控制

Five product model:

NDH - A arc resistance tester - microcomputer control

NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询!

落球回弹试验仪,介电击穿强度测定仪 落球回弹试验仪,介电击穿强度测定仪 落球回弹试验仪,介电击穿强度测定仪 落球回弹试验仪,介电击穿强度测定仪 落球回弹试验仪,介电击穿强度测定仪