- 电压击穿试验仪
- 介电常数
-
电阻率测试仪
-
落球回弹试验仪,介电击穿强度测定仪:新-高温电阻率测试仪
-
高温绝缘电阻率测试仪
-
落球回弹试验仪,介电击穿强度测定仪:石墨电极电阻率测试仪
-
落球回弹试验仪,介电击穿强度测定仪:210-炭块电阻率测试仪
-
落球回弹试验仪,介电击穿强度测定仪:121T-高温电阻率测试...
-
落球回弹试验仪,介电击穿强度测定仪:多功能极片电阻测量系统
-
121A-绝缘电阻率测试...
-
落球回弹试验仪,介电击穿强度测定仪:点对点对地电组率测试仪
-
落球回弹试验仪,介电击穿强度测定仪:油介质损耗电阻率测试仪
-
落球回弹试验仪,介电击穿强度测定仪:121A1-热刺激电流测...
-
落球回弹试验仪,介电击穿强度测定仪:121B-全自动电阻率测...
-
落球回弹试验仪,介电击穿强度测定仪:高低温绝缘电阻率测量系统
-
121-体积表面电阻率测...
-
落球回弹试验仪,介电击穿强度测定仪:新-高温电阻率测试仪
- 粉末电阻率测试仪
- 导体、半导体电阻率
- 耐电弧测试仪
- 漏电起痕试验仪
- 电池隔膜电弱点测试仪
- 橡胶塑料检测仪器
- 力学性能检测仪器
-
落球回弹试验仪,介电击穿强度测定仪:海绵泡沫材料检测仪器
-
泡沫起升仪
-
新-泡沫分析仪
-
海绵泡沫切割机
-
织物透气率测试仪
-
落球回弹试验仪,介电击穿强度测定仪:海绵压缩变形试验箱
-
落球回弹试验仪,介电击穿强度测定仪:海绵压缩变形试验机
-
落球回弹试验仪,介电击穿强度测定仪:海绵落球回弹试验仪
-
海绵泡沫密度测试仪
-
落球回弹试验仪,介电击穿强度测定仪:海绵压陷硬度测试仪
-
海绵压缩蠕变测试仪
-
海绵空气透气率测试仪
-
落球回弹试验仪,介电击穿强度测定仪:海绵往复冲击疲劳试验机
-
落球回弹试验仪,介电击穿强度测定仪:海绵泡沫缓冲能量试验机
-
2000-海绵拉伸撕裂试...
-
1000-海绵拉伸撕裂试...
-
落球回弹试验仪,介电击穿强度测定仪:慢回弹泡沫复原时间测试仪
-
落球回弹试验仪,介电击穿强度测定仪:新-慢回弹泡沫复原时间测...
-
泡沫起升仪
- 受电弓/碳滑板检测仪器
- 落球回弹试验仪,介电击穿强度测定仪:材料热物理性能实验设备
- 热物性检测仪器
-
粉末测试设备
-
霍尔流速计
-
真密度测试仪
-
斯柯特容量计
-
休止角测定仪
-
粉末压实密度仪
-
振实密度测试仪
-
颗粒图像分析仪
-
全自动真密度仪
-
塑料流动性测定仪
-
粉尘安息角测试仪
-
多功能压力测量系统
-
落球回弹试验仪,介电击穿强度测定仪:粉末自然堆积密度仪
-
粉体综合物性测试仪
-
氧化铝流动角测定仪
-
塑料表观密度测试仪
-
落球回弹试验仪,介电击穿强度测定仪:普通磨料堆积密度仪
-
白土堆积密度测定仪
-
落球回弹试验仪,介电击穿强度测定仪:氧化铝流动时间测定仪
-
压实密度粉末电阻率仪
-
落球回弹试验仪,介电击穿强度测定仪:陶粒砂体积密度测定仪
-
落球回弹试验仪,介电击穿强度测定仪:氧化铝松装密度测定仪
-
落球回弹试验仪,介电击穿强度测定仪:表面活性剂表观密度仪
-
落球回弹试验仪,介电击穿强度测定仪:自由流动堆积密度测定仪
-
超硬材料堆积密度测定仪
-
霍尔流速计
- 比表面测试仪
- 电池检测
- 燃烧性能试验机
- 金属检测仪器
-
焙烧炉试验机
ASTMD495耐高压低电流电弧放电试验机
高交流电压小瞬时电流校正仪(耐弧光校正仪)-(核算机调控)
High voltage low current tester (arc resistance tester) - (computer control)
设备标题:耐电弧试验机
Product name: electric arc resistance tester
厂品形号:NDH-A
Product model: NDH - A
满意原则:GB/T 1411-2002《固态垃圾接地相关材料耐高压得过低功率脉冲蓄电池充电的冲击试验》(符合IEC 61621-1997)及ASTM D495等标淮的标准制定创造的,并具备IEC 149、UL
Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc
一 概述
一An overview of the
关键应用范畴及功能性:
本冲击实验机是可以依照广泛应代替马达、小家电和家居小家电等行业领域的技工用塑胶、聚酯硅橡胶胶和耐压漆等耐压相关建材的耐弧光放电耐磨性综合评价,主代替固态物耐压相关建材如:塑胶、贴膜、聚酯硅橡胶、白云母、陶瓷图片、有机玻璃、耐压油、耐压漆、纸壳等媒介的耐弧光放电耐磨性测试英文;
本试验台机由估算机把控正常运行,可能显现之前工作设计所报告阶段及工作设计所报告事件,工作设计所报告结尾后并导出之前工作设计所报告数据分析,并可复印.的标准调查行业报告。
Main scope of application and features:
This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;
This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report
二 功能特点
1 滤油机为升降内置式空间结构,底端为进行装置,上方为实验箱。
2 本企业产品用于*新自动化有效控制枝术,借助采用环节(IEC或ASTM)可手动开始实验设计,并在pc上体现疲劳试验过程中和可是。
3 **功效优异,抗侵扰专业能力强,自测误差高。
二:Functional features:
1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.
2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.
3 good safety performance, strong anti-interference ability, high test precision.
三 主要技术参数
1 电弧焊接通断时刻精度:不大于 ±10ms
2 调压器容积:2kVA
3 额定功率疲劳试验电流电压:12.5kV
4 检测输出功率精确:±3%
5 直流电压设定导致精度:±10% 工作电流在线测量精密度:1.5%
6 电极片对钢材拉伸试验负担:(0.5±0.05)N
7 金属电极产品:钨棒
8 探针离:(6.35±0.1)mm(IEC)
(6.0±0.1)mm(ASTM)
9 选择周围工作温度因素:(23±2)℃
10 动用生态温度:(50±5)%
11 电原:220V±5% 50Hz
12 试验台 最简单的方法: 执行标准/美标/10 mA 重复/20 mA 间断性/30 mA重复/40 mA连续性
13 可靠性试验编译程序以下的:
| 步骤段 | 电弧焊接瞬时电流 mA | 焊弧通断的时间s | 各系统程序段维持的时间s | 试验报告总时间间隔s | |
| | | IEC 61621 | ASTM D495 | | |
| 1 | 10 | 1/8s通 7/8s断 | 1/4s通 7/4s断 | 60 | 60 |
| 2 | 10 | 1/4s通 3/4s断 | 1/4s通 3/4s断 | 60 | 120 |
| 3 | 10 | 1/4s通 1/4s断 | 1/4s通 1/4s断 | 60 | 180 |
| 4 | 10 | 间断通 | 60 | 240 | |
| 5 | 20 | 间断性通 | 60 | 300 | |
| 6 | 30 | 反复通 | 60 | 360 | |
| 7 | 40 | 连续性通 | 60 | 420 | |
Three main technical parameters:
Error: 1 arc on-off time less than plus or minus 10 ms
Transformer capacity: 2 kva
3 test voltage rating: 12.5 kV
4: test voltage accuracy + / - 3%
5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%
6 electrode pressure on sample: (0.5 + 0.5) N
7 electrode materials: tungsten rods
8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)
9 using the environment temperature (23 + 2) ℃
10 use environment humidity: (50 + 5) %
Power supply: 220 v + 5% for 50 hz 10 a
Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous
13 test procedure is as follows:
Procedures section of the arc current
MA arc on-off time s the program s test total duration time s
IEC 61621 ASTM D495
1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s
2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s
3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s
4 consecutive 10 to 60, 240
5 20 consecutive 60, 300
30 consecutive 6 to 60, 360
7 consecutive 40 to 60, 420
四 配置
| 号码 | 名字大全 | 数 | 备注名称 |
| 01 | 耐电弧放电测式仪 | 单台 | |
| 02 | 电极片模式 | 套 | |
| 03 | 电极片网架支座 | 1套 | |
| 04 | 电原拖链电缆 | 做一套 | |
| 05 | 接地线放** | 一支队伍 | |
| 06 | 直流电压毫安表 | 几台 | |
| 07 | 笔记本电脑测控PC软件 | 设计一套 | |
| 08 | 试板架 | 一瓶 | |
| 09 | 电极片路程规则块 | 2块 | |
| 10 | 角度来的标准块 | 2块 | |
| 11 | 陶瓷图片片 | 2片 | |
| 12 | 喷墨打印纸机 | 1台 | 高端品牌 |
| 13 | 确定机 | 1台 | 项目 |
| 14 | 在使用表示书 | 1份 | |
| 15 | 合理证 | 1份 | |
Four configuration:
Serial number name number note
01 arc resistance tester
02 a electrode system
03 electrode bearing a set
04 a set of power cable
05 ground put a rod
06 milliammeter current one
7 a set of computer measurement and control software
08 specimen holder a
09 electrode distance standard 2 blocks
Standard 2 blocks of 10 Angle
11 ceramic pieces 2 pieces
12 one brand inkjet printer
13 1 computer brand
14 1 instruction manual
15 1 certificate
五 服务产品参数:
NDH-A 耐焊弧做实验的时候仪-微机控住
NDH-B 耐电弧放电试验报告仪-触碰屏的控制
Five product model:
NDH - A arc resistance tester - microcomputer control
NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询!